All Categories
EN

Products

Home>>Products>RTU Enamel Powder>White RTU Enamel Powder for Cookware

Contact Us

+86-13574208778

+86-13574208778

jack@nolifrit.com

Building 4, Power Valley Industrial Park, Majiahe Street, Tianyuan District, Zhuzhou City, Hunan Province, China

White RTU Enamel Powder for Cookware

White RTU Enamel Powder for Cookware


A white ready-to-use cover coat for cookware, applied wet over a ground coat.

Product Description

White ready-to-use enamel powder for wet-process application on steel, fired at a nominal 820 °C. A titanium-white cover coat for cookware and kitchenware, applied over a ground coat.

  • ProcessWet
  • Firing820 °C nominal
  • ColourWhite
  • Coating roleCover coat

What the material does well

  • A white cover coat. Applied over a ground coat, it gives the white finish on cookware and kitchenware.
  • Lower firing than the black grades. The nominal firing temperature is 820 °C, below the 850 °C used for the black grades on this site.
  • One grade for the role. The grade is specified as the cover coat; the ground coat is a separate product and is not covered by this page.

Technical data

Product specifications

ParameterSpecification
Application methodWet process (slurry)
Firing temperature820 °C (reference value, on steel; not a fixed setting for every part)
ColourWhite
Coating roleCover coat, applied over a ground coat
Acid resistanceA

A is the result recorded on the citric acid test for this grade; it is not a certified or general rating.

What the line has to provide

  • Substrate and pre-treatment. As set out on the data sheet of the grade, before the part reaches the coating stage.
  • Two-coat build. A ground coat is applied and fired before the cover coat; the ground coat is specified separately.
  • Furnace capability. A furnace able to reach the nominal 820 °C with the load in it.
  • Firing conditions assessed on the part. The setting and dwell that suit a given part follow its size, mass, geometry and the way the furnace is loaded, and are agreed with our technical team.

Outside this range: this grade is the cover coat for cookware and kitchenware. Parts in cast iron, stainless steel, aluminum, galvanized steel or pre-coated steel are assessed separately with our technical team.

Questions we are asked

Is a ground coat needed under it?
Yes. This is a cover coat; it is applied over a ground coat, which is a separate product and is specified separately.
Why is the firing temperature lower than on the black pages?
The figure is the nominal value recorded for this grade. Firing settings still follow the part, the coat build and the furnace.
What do you need to assess an application?
The substrate, the part and its geometry, the coat build you plan, the wet route at your plant, and the firing equipment you can reach.

Next step

Send the part, the substrate and your firing conditions. We will confirm the coat build and take the firing assessment from there.

Send the part details

Values describe the grades, not a guarantee for a particular part. The data sheet issued with a quotation carries the binding figures.