All Categories
EN

Products

Home>>Products>RTU Enamel Powder>Blue RTU Enamel Powder for Water Heater Tanks

Contact Us

+86-13574208778

+86-13574208778

jack@nolifrit.com

Building 4, Power Valley Industrial Park, Majiahe Street, Tianyuan District, Zhuzhou City, Hunan Province, China

Blue RTU Enamel Powder for Water Heater Tanks

Blue RTU Enamel Powder for Water Heater Tanks


A blue ready-to-use powder for wet-process enameling of water-heater tanks, with water addition and slip density stated on the data sheet.

Product Description

Blue ready-to-use enamel powder for wet-process application on steel water-heater tanks, fired at a nominal 850 °C. The slurry figures below are the ones recorded on the grade data sheet.

  • ProcessWet
  • Firing850 °C nominal
  • ColourBlue
  • Acid resistanceA+

What the material does well

  • A wet route with a settable slurry. Water addition and slip density are stated on the data sheet, so the slurry can be set and checked against a reference.
  • An acid-resistance result on record. A+ is recorded on the citric acid test for this grade.
  • One grade for the tank interior. The grade is specified for the inner coating of water-heater tanks.

Technical data

Product specifications

Parameter Specification
Application method Wet process (slurry)
Firing temperature 850 °C (reference value, on steel; not a fixed setting for every part)
Colour Blue
Acid resistance A+
Water addition 50–55 ml
Slip density 160–170 g per 100 ml

A+ is a result recorded on the citric acid test, not a certified or general rating. The water and density figures are the values printed on the grade data sheet, in the sheet’s own units; they are a starting point for the plant, not a fixed setting for every batch.

What the line has to provide

  • Substrate and pre-treatment. As set out on the data sheet of the grade, before the part reaches the coating stage.
  • Slurry control. The slurry is set to the figures above and adjusted for the plant; the sheet with the quotation is the binding one.
  • Furnace capability. A furnace able to reach the nominal 850 °C with the load in it.
  • Firing conditions assessed on the part. The setting and dwell that suit a given tank follow its size, mass and geometry and the way the furnace is loaded, and are agreed with our technical team.

Outside this range: this grade is for steel water-heater tanks. Parts in cast iron, stainless steel, aluminum, galvanized steel or pre-coated steel are assessed separately with our technical team.

Questions we are asked

Are the water and density figures fixed?
They are the values printed on the grade data sheet. Plants adjust within their own practice; the sheet issued with the quotation is the binding one.
Is this grade the same as the one for GGH?
No. Each application has its own grade and its own recorded parameters; the figures on this page belong to this grade.
What do you need to assess an application?
The tank drawing, the substrate and its thickness, the wet route at your plant, and the firing equipment you can reach.

Next step

Send the tank drawing, the substrate and your firing conditions. We will confirm the grade and take the firing assessment from there.

Send the part details

Values describe the grades, not a guarantee for a particular part. The data sheet issued with a quotation carries the binding figures.