All Categories
EN

Products

Home>>Products>Electrostatic Enamel Powder>Matte Black Electrostatic Enamel Powder

Contact Us

+86-13574208778

+86-13574208778

jack@nolifrit.com

Building 4, Power Valley Industrial Park, Majiahe Street, Tianyuan District, Zhuzhou City, Hunan Province, China

Matte Black Electrostatic Enamel Powder

Matte Black Electrostatic Enamel Powder


A matte black powder for dry electrostatic enameling of steel - the finish for parts where a gloss surface is not wanted.

Product Description

Black porcelain enamel powder for dry electrostatic application on steel, fired at a nominal 850 °C, giving a matt black finish. Used where a gloss surface is not wanted, on gas stove parts, oven panels and trays, and grill bodies. 

  • FinishMatt black
  • Firing850 °C nominal
  • AdhesionGrade 1–2
  • Acid resistanceNo claim made

What the material does well

  • No slurry preparation or drying step. The powder is applied dry, and the coated part goes from the booth to the furnace.
  • Film build controlled during spraying. The deposited layer depends on the equipment settings, part geometry and line conditions.
  • A matt surface. The finish is matt black. Where a gloss surface is specified, the glossy black grade is the one to specify.

Technical data

Product specifications

Parameter Specification
Substrate Low-carbon cold-rolled steel; enamel-grade steel recommended
Surface preparation Degreasing or acid pickling as the part requires; no rust, dust or oil before coating
Application method Dry electrostatic spraying
Firing temperature 850 °C (reference value, on steel; not a fixed setting for every part)
Colour Black
Surface finish Matt
Adhesion Grade 1–2
Acid resistance -

The data sheet for this grade makes no acid-resistance claim. A dash means that the data sheet of that grade does not list the item; it is a statement about the data sheet, not about the material.

What the line has to provide

  • Substrate and pre-treatment. Low-carbon cold-rolled steel, prepared as set out under Technical data before the part reaches the booth.
  • Electrostatic equipment. A high-voltage generator and a spray gun, run at settings that suit the part being coated.
  • Furnace capability. A furnace able to reach the nominal 850 °C with the load in it.
  • Firing conditions assessed on the part. The setting and dwell that suit a given part follow its size, mass and geometry and the way the furnace is loaded, and are agreed with our technical team.

Outside this range: this grade is confirmed for low-carbon cold-rolled steel. Cast iron, stainless steel, aluminum, galvanized steel and pre-coated steel are outside the confirmed scope of this grade; a part in one of those substrates is assessed separately with our technical team, and other product ranges are specified separately.

Questions we are asked

Is a drying step needed after spraying?
No. The part goes from the booth to the furnace. Drying belongs to wet processes, where water has to be removed before firing.
When is the matt finish the right choice?
The finish is settled on the drawing or specification. This grade gives a matt black surface; the glossy black grade gives a gloss one.
What do you need to assess an application?
The substrate grade and thickness, the part and its geometry, the application method available at your plant, and the firing equipment you can reach.

Next step

Send the substrate, the part and your firing conditions. We will confirm whether the dry process fits the part and take the firing assessment from there.

Send the part details

Values describe the grades, not a guarantee for a particular part. The data sheet issued with a quotation carries the binding figures.