All Categories
EN

Products

Home>>Products>RTU Enamel Powder>Blue RTU Enamel Powder for GGH and Heat Exchangers

Contact Us

+86-13574208778

+86-13574208778

jack@nolifrit.com

Building 4, Power Valley Industrial Park, Majiahe Street, Tianyuan District, Zhuzhou City, Hunan Province, China

Blue RTU Enamel Powder for GGH and Heat Exchangers

Blue RTU Enamel Powder for GGH and Heat Exchangers


A blue ready-to-use powder for wet-process enameling of GGH and heat-exchanger elements - two grades, one specification.

Product Description

Blue ready-to-use enamel powder for wet-process application on steel, fired at a nominal 850 °C, for GGH and heat-exchanger elements. Two grades are listed for this application and they carry the same specification.

  • ProcessWet
  • Firing850 °C nominal
  • ColourBlue
  • GradesTwo, same specification

What the material does well

  • Two grades, one specification. Both grades carry the specification below; the grade for a given element is settled with us.
  • A wet route for long elements. The slurry route suits elements that are dipped or sprayed rather than coated in a booth.
  • An acid-resistance result on record. A+ is recorded on the citric acid test for these grades.

Technical data

Product specifications — both grades

ParameterSpecification
Application methodWet process (slurry)
Firing temperature850 °C (reference value, on steel; not a fixed setting for every part)
ColourBlue
Acid resistanceA+

A+ is a result recorded on the citric acid test, not a certified or general rating. Both grades share this specification; the grade designation is settled with us for the element concerned.

What the line has to provide

  • Substrate and pre-treatment. As set out on the data sheet of the grade, before the part reaches the coating stage.
  • Element handling. Dipping or spraying arrangements able to take the length of the element being coated.
  • Furnace capability. A furnace able to reach the nominal 850 °C with the load in it.
  • Firing conditions assessed on the part. The setting and dwell that suit a given element follow its size, mass and geometry and the way the furnace is loaded, and are agreed with our technical team.

Outside this range: these grades are for steel GGH and heat-exchanger elements. Parts in cast iron, stainless steel, aluminum, galvanized steel or pre-coated steel are assessed separately with our technical team.

Questions we are asked

How do the two grades differ?
They carry the same specification. The designation for a given element is settled with us; nothing on this page distinguishes them by a parameter.
Can a wet process cover long tubes?
It depends on the dipping or spraying arrangement at your plant and on the element length. Send the drawing and we will go through the route.
How does this differ from the tank grade?
It is a different grade for a different application. The figures here belong to these grades and are not carried across.

Next step

Send the element drawing, the substrate and your firing conditions. We will confirm the grade and take the firing assessment from there.

Send the part details

Values describe the grades, not a guarantee for a particular part. The data sheet issued with a quotation carries the binding figures.