All Categories
EN

Products

Home>>Products>Electrostatic Enamel Powder>Blue Electrostatic Enamel Powder for GGH and Heat Exchangers

Contact Us

+86-13574208778

+86-13574208778

jack@nolifrit.com

Building 4, Power Valley Industrial Park, Majiahe Street, Tianyuan District, Zhuzhou City, Hunan Province, China

Blue Electrostatic Enamel Powder for GGH and Heat Exchangers

Blue Electrostatic Enamel Powder for GGH and Heat Exchangers


A blue powder for dry electrostatic enameling of GGH and heat-exchanger elements, with heat-shock resistance recorded on the grade data sheet.

Product Description

Blue porcelain enamel powder for dry electrostatic application on steel, fired at a nominal 850 °C, for GGH and heat-exchanger elements. A glossy blue finish with a recorded heat-shock resistance.

  • FinishBlue glossy
  • Firing850 °C nominal
  • Heat shock400 °C
  • Acid resistanceA+

What the material does well

  • Heat-shock resistance recorded at 400 °C. A figure from the grade data sheet, not a service guarantee for a particular element.
  • No slurry preparation or drying step. The powder is applied dry, and the coated part goes from the booth to the furnace.
  • Film build controlled during spraying. The deposited layer depends on the equipment settings, part geometry and line conditions.

Technical data

Product specifications

Parameter Specification
Substrate Low-carbon cold-rolled steel; enamel-grade steel recommended
Surface preparation Degreasing or acid pickling as the part requires; no rust, dust or oil before coating
Application method Dry electrostatic spraying
Firing temperature 850 °C (reference value, on steel; not a fixed setting for every part)
Colour Blue
Surface finish Glossy
Adhesion Grade 1–2
Acid resistance A+ on the citric acid test
Heat-shock resistance 400 °C

A+ is a result recorded on the citric acid test, not a certified or general rating. The heat-shock figure is the value recorded on the grade data sheet.

What the line has to provide

  • Substrate and pre-treatment. Low-carbon cold-rolled steel, prepared as set out under Technical data before the part reaches the booth.
  • Electrostatic equipment. A booth and gun arrangement able to take the length of the element being coated.
  • Furnace capability. A furnace able to reach the nominal 850 °C with the load in it.
  • Firing conditions assessed on the part. The setting and dwell that suit a given element follow its size, mass and geometry and the way the furnace is loaded, and are agreed with our technical team.

Outside this range: this grade is confirmed for low-carbon cold-rolled steel. Cast iron, stainless steel, aluminum, galvanized steel and pre-coated steel are outside the confirmed scope of this grade; a part in one of those substrates is assessed separately with our technical team, and other product ranges are specified separately.

Questions we are asked

What does the 400 °C figure mean?
It is the heat-shock resistance recorded on the grade data sheet. Whether it covers a given element depends on the element design and the service cycle; we assess that with you.
How does this grade differ from the tank grade?
Both are dry-process blue grades. The recorded heat-shock figure and the application are what separate them; the parameters above are this grade’s own.
What do you need to assess an application?
The substrate grade and thickness, the element and its geometry, the application method available at your plant, and the firing equipment you can reach.

Next step

Send the element drawing, the substrate and your firing conditions. We will confirm whether the dry process fits the element and take the firing assessment from there.

Send the part details

Values describe the grades, not a guarantee for a particular part. The data sheet issued with a quotation carries the binding figures.