All Categories
EN

Products

Home>>Products>RTU Enamel Powder>Low-Firing RTU Enamel Powder for Cast-Iron Cookware

Contact Us

+86-13574208778

+86-13574208778

jack@nolifrit.com

Building 4, Power Valley Industrial Park, Majiahe Street, Tianyuan District, Zhuzhou City, Hunan Province, China

Low-Firing RTU Enamel Powder for Cast-Iron Cookware

Low-Firing RTU Enamel Powder for Cast-Iron Cookware


Low-firing ready-to-use powders for cast-iron cookware, in four variants across colour and surface.

Product Description

Low-firing ready-to-use enamel powders for cast-iron cookware, fired at a nominal 780 °C. Four variants are offered across colour and surface, so the finish can follow the product rather than the other way round.

  • ProcessWet
  • Firing780 °C nominal
  • VariantsFour
  • ColourBlack / Grey / White

What the material does well

  • A low firing temperature. The nominal firing temperature is 780 °C, below the 850 °C used for the steel grades on this site.
  • Four variants. Black glossy, black matt, grey matt and white, so the finish is chosen for the product.
  • One application. All four are specified for cast-iron cookware.

Technical data

Product specifications — common to the four variants

Parameter Specification
Application method Wet process (slurry)
Firing temperature 780 °C (reference value; not a fixed setting for every part)

Substrate grade, pre-treatment and coat build for a cast-iron part are confirmed with our technical team for the part concerned.

Variants

Parameter Black glossy Black matt Grey matt White
Colour Black Black Grey White
Surface finish Glossy Matt Matt Glossy
Specify it when A glossy black finish is called for A matt black finish is called for A grey matt finish is called for A white finish is called for

What the line has to provide

  • Cast-iron parts. The four variants are specified for cast-iron cookware; the part and its section are reviewed with our technical team before a variant is fixed.
  • Slurry preparation. The slurry is prepared to the data sheet of the variant being used.
  • Furnace capability. A furnace able to reach the nominal 780 °C with the load in it.
  • Firing conditions assessed on the part. The setting and dwell that suit a given part follow its size, mass and section and the way the furnace is loaded, and are agreed with our technical team.

Outside this range: these variants are for cast-iron cookware. Steel parts use the grades on the other product pages; the two families are not interchangeable on a given part.

Questions we are asked

Why is the firing temperature lower than on the steel pages?
The figure is the nominal value recorded for these grades. Firing settings still follow the part and the furnace.
How do I choose among the four variants?
By the finish called for on the drawing or specification: black glossy, black matt, grey matt or white.
What about pre-treatment for cast iron?
It is confirmed with our technical team for the part concerned, together with the variant.

Next step

Send the part drawing, the cast-iron section and your firing conditions. We will confirm the variant and take the firing assessment from there.

Send the part details

Values describe the grades, not a guarantee for a particular part. The data sheet issued with a quotation carries the binding figures.